How's the iphone? How does an apple phone connect to a projector? Can the new iphone8 connect? Let's take a look at the details of the course。
Method of connecting apple phones to projectors (steps)
1. Ezcast (a multimedia official sharing software for mobile phones, tablet pc screen switching) was installed on the iphone app store at the time of the first use of the cell phone screen projector。
2. Connecting mobile phones and projectors requires three interfaces to the converter, the following graphs for the converter's electrical interface, the vga interface for the converter to the projector, and the usb interface for the converter to iphone, after completion of the connection:
3. Open iphone with ezcast, open ezcast to the upper right corner, then enter iphone's “personal hotspot” and airplay to match the hotspots and complete the iphone and projector's hotspot connections
4. When the hot spot match is completed, the device connection is successful, at which point the converter can be upgraded at ezcast and the operational steps are:
5. The iphone and projector can be directly synchronized as the converter solids are upgraded. The following is a projection of the iphone ppt document, which is still very clear
6. The iphone project shows a video display of the effect of the achive:
7. The entire step of the iphone and projector connections, where the converters played a significant role. The converter of this section supports the iphone cable projection, but in order to ensure the stability and continuity of the projection of the office, in particular the meetings, while ensuring the stability of the network and equipment connection, it does not interrupt the session. The following converters:
How the iphone8 connects the projector
The above is a detailed step course for the apple phone connect projector, so can the new iphone8 connect to the projector? How do you connect? Let's find out:
Method i: wireless connection, using the mirror function of an apple phone, airplay。
The most common method used to connect a projector with a mobile phone is to determine whether the projector has a wireless co-screen function. I've looked at the products of traditional light projectors like min ki and eppson that don't seem to support wireless co-screens, and smart projectors like nuts are supportive, so we have to confirm first。
Once confirmed, the " screen mirror" option is visible when the bottom of apple 8 slides up and out of the control centre. Click on the screen mirror to select the corresponding projector name, which can be on the screen in approximately five seconds, very quickly and conveniently. (ps: based on apple 8 and projector in the same wifi environment)
Method ii: wireless connection
The vast majority of projectors have high-resolution multimedia interfaces with hdmi as a signal source to connect to output images and voice。
So for apple 8, it's only necessary to buy a lightning switch to hdmi to connect to the same screen。
Method iii: direct interpolation
This is less common, but it seems to me to be the most convenient and fast way to connect, as if only the m6 of nuts were currently using it with a smart projection。
Specifically, the nut m6 has three magnetic inhalers that match different mobile phones, and of course the apple ligh ti ning interface. The cell phone is inserted directly into the projector, and the first connection is confirmed to be readable, followed by a fast screen in three seconds。
It is also highly synchronized and difficult to lose lines and break off suddenly, and there are advantages because of the direct connection, which is not influenced by the speed of the wifi wireless network。
