At 3 a. M., the young freshman who was in the liver thesis suddenly found his own saver, y7,000p, dead, forced to reboot the fan and still had no picture, and sent for testing before the main plate power chip was burned. Asked about the maintenance offer, the new one was straight: it was $2,200 for the official sale, $800 for the maintenance store in front of the district, and $1,500 for a mailing platform. How much is it going to cost to fix the y7,000p main plate? What's the difference between the different sources? Today we're going to figure this out and avoid the invisible pits of repair。
How much for the saver y7000p main panel? Money
I. Dismantling of y7000p master plate offers from different maintenance channels
Y7000p, a popular game book for those who want to save, has a high level of master plate integration and a very wide range of maintenance prices, with three main lines of quotation:
1. Official after-sale channels: most affordable but highest prices
The cost of maintenance after the official sale consists of the cost of materials plus labour costs for the original plate, which varies from $1,800 to $2,500 depending on the configuration of the y7000p processor, plus a standardized labour cost of $100-200 and an overall cost of between $1900 and $2,700. If your computer is under warranty and is artificially damaged, such as if the main plate has been burned and the interface has failed, the official will replace the whole new main plate free of charge, at no cost; but if the human damage is caused by water, over-frequency plates, falling, it will require full self-financing even in the event of insurance。
2. Underline third-party maintenance stores: high value for money but carefully screened
There are two types of third-party maintenance:
In response to reparable minor failures: single-point failures such as the burning of electrical capacity and short circuits, the repair manager simply needed to replace the corresponding parts at a cost of between $300 and $800, and the simpler the failure price。
Replacement of non-originally installed mainboards: if the main plate is badly damaged and cannot be repaired, the replacement of the new master plate is priced at between $1,000 and $1,800, with a partial provision of 30 natural security by a spectronomy firm。
However, third-party maintenance of fish dragons is mixed, and many small stores will switch their original cpus, memory and subsequent failures with low-cost flags。
3. Online repair platform: transparent prices but transport risks
A number of digital maintenance platforms now offer offers between official and sub-linear third parties, and the cost of replacing the main panel is between $1,200 and $2,000. The platform will clearly identify material and labour costs and some will provide 90-day quality assurance. However, the on-site repairs would entail transport risks, and it is recommended that the body sn code and internal parts be taken before they are sent in, so as to avoid the transfer of the parts。
Three key scenarios affecting y7000 p master plate maintenance costs
Unanthropogenic damage during warranty: free maintenance
If you can provide an invoice for the purchase machine, it is confirmed after testing that the failure of the main plate is a product quality problem, the official sale will replace the whole new main plate free of charge, at no cost. Y7000p, which used the main board six months later, offered an additional machine cleaning service after the official change of the main board free of charge。
2. Post-insurance unit failure: $300 will be done
If only small parts on the master plate were damaged, such as webchips, power capacity failure, the entire plate would not be needed to replace the main plate, which would require between $300 and $600 to repair, much more than the main plate. However, many maintenance stores deliberately overstated the failure and falsely claimed that the main plate was completely broken, thereby raising the price, suggesting that two additional shops should be tested before making a decision。
3. Associated damage: direct doubling of maintenance costs
If the main board is burned and the cpu, memory slot or graphic chip is burned, the cost of maintenance increases directly to over $3,000. For example, y7000 ps with internet users burned the main board and cpu at the same time, and the official post-sale offer was more than $3,000, which would be easier if new computers were replaced。
Three, y7000p master plate repairing pit avoidance guides
1. Do not believe in low-price traps and guard against parts being stolen
A number of roadside repair shops attract users under the banner “500 dollars to fix the main plate”, and when they do, they change your original cpu into a second-hand machine to take it apart. The body sn code and internal parts photographs must be taken prior to maintenance, and the parts markings must be checked on-site after maintenance to avoid diversion。
2. Water in and off, power outage at first
If the main plate fails as a result of water intrusion, the power is removed and the battery is removed at the first time, and it should not be forced to turn on, otherwise it will result in an increase in the size of the main plate and a direct doubling of maintenance costs. The main plate, which could have been repaired by $300, was finally replaced by $1,500。
3. Claims for maintenance of vouchers, reservation of claims
Whatever maintenance channel is chosen, maintenance orders and invoices must be sought after maintenance, specifying the content of the maintenance and the duration of the quality assurance. In the event of subsequent identical breakdowns, the maintenance order could be used to make it available free of charge to avoid the failure of the maintenance shop。
Iv. Concluding summary: reform or change? Cost of maintenance
Y7,000p master plate maintenance costs range from $300 to $2,700, with critical observations of the type of failure and the maintenance channels. If the cost of maintenance exceeds 50 per cent of the current second-hand value of computers, it would be more economical to replace the new computer directly; in the case of minor malfunctions, priority would be given to repairing third-party repair shops. In day-to-day use, care is taken to avoid overfrequency, to clean up thermal dust on a regular basis and to avoid water intrusion, which can effectively reduce the probability of failure of the main plate and save a significant amount of maintenance costs。
