Inkjet printer cartridges divided into one and one? For some out-of-the-world users, the issue has not been taken into account, although some users, though aware of the problem, are not well aware of the fact that printers are often subject to difficulties in selecting them, so today we say whether inkjet printers need to be integrated or separated。
Do you make it? The cartridges are both one-size and split
Let us begin with a simple explanation: a single cartridge means a print head that is designed to be on the ink and replaced by a new ink when the ink is run out, and therefore the cost of a single ink is slightly more expensive than that of a colleague; a split means a jet and cartridge design that is separated from the ink and does not need to be replaced with a print head after the ink has been run out, which reduces printing costs to some extent。
One cartr. (up) and split cartridge (down)
Since it's a low cost to print split cartridges, should all printers choose split cartridges? But the inkjet printers in the market, as we can see, are not all split cartridges, such as the hewlett-packard and qin domestic inkjet series (e. G. Hewlett-pixed, queen-pixma series), which use one-size cartridges, while commercial inkjets, page view (page width), large face, etc。
The hewlett-packard energy family series uses a single cartridge
All eppson inkjet printers use split cartridges
What do you see in the list of inkjet printers? What's the rationale for a small printout that is designed to use a single inkbox, and a slightly larger commercial product that is printed to use a split ink cartridge? How should users choose ink printing devices
How? Combined printing and maintenance costs
The combined cost of a printer includes the price of the whole machine + the cost of printing + the cost of later maintenance, and, taking into account the different needs of different users, the factory chambers of commerce introduce product lines suitable for different users。
We all know that ink-jet printers are not used for long periods of time, when printing is not clear, breakpoints, breakwires, etc., that is, when we need to flush our head with a lot of ink, when we have to ask for after-sale services, and when printing head repair or replacement costs are not cheap, then users should consider whether to buy one-size cartridge printers or split cartridge printers。
If your printout is not very large, it is only occasional that you print one or two photographs or documents (most household users), then you need to consider a single inkbox, even if it's blocked, which is much cheaper than a single printer nozzle, which is why the manufacturer designed the domestic printer cartridge to be one, and the price of the domestic printer unit will not be very high, even if it is expensive, but the printout is not large。
You don't have to get a one-size-fits-all ink plug for a long time. Head
Some micro-enterprises or professional users, with relatively large print runs in their usual working hours, with very little rest time for printers, and a blockage that is virtually non-existent (which is inevitable, of course, to exclude long-term damage to printing heads), prefer to opt for commercial spray and large-face printers such as split cartridges, since the one-size cartridges need to be replaced with the printing head, so that the cost of using them is striking, while the split cartridges can continue to be printed when they are invalid, with only ink replacement being needed to save a significant portion of the printing costs。
Cartridge header
The simpler the maintenance of the late-stage ink cartridges, the more simple they are for household users, the better the quality of the one-size cartridges, the less costly they are to repurchase the cartridges, the less technical support needed, and the greater value that companies place on the overall cost of use, often with specialized technicians in the company, the more appropriate use of low-cost split cartridges would be。
I don't recommend ink and supply
In practice, because of the high cost of original cartridges, some “smart” users would choose to modify the cartridges - either by supplying them or by placing them ink - which would save a significant amount of printing costs, but the pen is not recommended。
First of all, it is relatively convenient to say that a break-up cartridge, a break-up cartridge, is retrofitted, and that the printing head has a slightly longer lifetime, particularly of the eppian microvoltage head, so that the man who uses the eppian inkjet printer has a higher rate of retrofitting, but i do not think it would be advantageous to use compatible or cheap inkjet to accelerate the damage to the head, to reduce the head life of the print, and to cause damage to the printer itself, although printing costs have been saved, but to run the risk of loss of warranty and maintenance costs for printing head, and even to the end of the printer。
Retrofitted supply
For an ink cartridge, the risk of ink filling may be slightly smaller, the user refills the ink into an empty ink when the ink is run out, most of the ink does not cause excessive damage to the printing head if it is properly operated, even if the ink is used in a box that should have been scrapped, although, of course, such ink cartridges are unlikely to limit the number of ink fillings to users, generally three to four times after the ink in which the original ink is used, and later the quality of the printing is deteriorating. An integrated ink filling also has the disadvantage of losing the warranty function, and maintenance staff will test the ink used from the waste ink to see if it is original, and the printer will still not benefit from the warranty service if it is found to be compatible with the ink。
One cartridge ink
Even if the supply and ink were to a certain extent able to reduce printing costs, the risks to which it is exposed are positive, so i suggest that you use the original material to avoid hypocrisy。
Four, one and the other. Head
It's both one and another. Head
Whether it's a single ink cartridge or a split ink cartridge, there's a plug in the ink printer, and it's really possible to avoid it. Before we talk about a solution, let's sum up the reason for the head in the print, and only “medicines” can be “medicines” to “diseases”
Cartridge traffic
The authors conclude that the reasons for the blockage can be broadly summarized in three ways, one because the ink on the nozzle is likely to dry up, causing congestion. Even the ink in the ink in the cartridge is seriously dried up; second, the external air factor and the printing paper are not used properly, the dust in the air and the too much sticky paper. Blocking on nozzles; third, the use of low-quality compatible consumables, without the support of proprietary technologies, non-compliant processes and thick ink particles have the potential to cause nozzles。
It would be easier to avoid a blackout. First, it is important for printers to place themselves in a cool, but not humid, location and avoid windows as much as possible; secondly, it is really uneconomical to be careful about the quality of the paper printed, to break hundreds of dollars of nozzles for a few cents, and not to often remove cartridges from the ink, and to ban hand-held head printing; and finally, it is important to be mindful of the use of original or high-quality compatible materials。
In addition to these three taboos, there are a number of other prevention measures that are needed to better protect your printer。
1. When there is a sudden power outage, power outage, and the cartridge cannot return to its normal location, it is necessary to wait for the electrical voltage to stabilize before it is turned on and until the cartridges are returned to normal use. This is to prevent the "capture" of printing head nozzles from being exposed to ink concentration and wind drying when printing idle. N. B. When the printer's red power signal is still blinking, it is important that the power plugs or the printer's power is not removed at will。
2. Even if you do not use it for a long period of time, you should open a self-check every other month. Since the printer calculates the time interval of the switch on the basis of its internal clock and automatically cleans the head of the print on the basis of its length, after each normal turn-on, the purpose is also to prevent the long-term non-use of which causes nozzle plugging and therefore the normal printing。
3. When ink is run out, new cartridges need to be replaced in a timely manner. Because failure to replace them in a timely manner can lead to the drying up of the jets。
4 customized different printing methods. Ink saving is achieved by choosing to use different cartridges, media types, self-adjusted printing concentrations, and custom printing patterns。
5. In order to effectively avoid long-term exposure of cartridges to air, dry head plugs should be placed in a dedicated jet storage box when printers are suspended。
6. Regular cleaning of print nozzles. When cleaning, care should be taken to swab the edge of the nozzle, using as much as possible high-quality wet paper towels or paper towels. Then you use the cleaning key on your control panel to wash the nozzle until the printout is clear。
