Many owners, when they first contact the entire cabinet, are confused about what exactly they are doing, or even mistakenly think they're just making a closet, which is much more than that. Today, in the eyes of the senior industry, all the issues of concern are taken apart。
What are the services for the whole-house cabinet custom-processing
From the shoe cabinets, the forklock cabinets, the stool exchange, to the living room television cabinets, the balcony cabinets, the barber cabinets, to the kitchen area as a whole, the dining cabinets, the embedded refrigerator cabinets, all the rooms customised to cover all the space that needs to be collected at home。
In addition to conventional cabinets, special needs are also within the range of services, such as amphibious corner cabinets, slanted attic cabinets, embedding steamed oven cabinets, which cannot be customised to address space waste caused by household defects。
In addition, indoor wooden doors, wood-covered walls, etc., which are built around the house, can also be synchronized with cabinet custom processing to achieve consistency in style, but need to be connected with designers in advance to avoid later-stage irregularities。
There are also study cabinets in children's rooms, invisible bed support cabinets in the study room, laundry dryer cabinets in the balcony, all of which are customized to be part of the home-wide cabinet-based custom-processing services that meet the individual needs of different families。
What is the difference between the core needs of different population groups to customize their entire cabinets
The core needs of the new home improvement owners in the primary population are the overall layout of the house, whether in the fur room or in the fine-fitting room, and the need to customize cabinets covering all space, to address the problem of the full intake from house-to-house to kitchen guards, and to avoid confusion of style resulting from the later addition of finished furniture。
Young couples in a marriage have chosen to process them, most importantly in style, such as a very simple, light-frozen combination, with a balance of value for money. After all, with a limited budget for renovation, it is not possible to overspent, and tends to give preference to well-dressed and transparent offers。
The core needs of the mother/triple family are environmental protection and safety, especially the customisation of the children's home, with high-level environmental panels and safety details such as round-angled design, hand-to-hand hardware and storage space to meet the needs of toys, books and clothing as children grow up。
The owners of large layers/margins/houses within the improved population focus more on the matching unity of the whole house, such as the colour of the cabinet, the wooden doors, the walls, the perfect quality of the material, and the increased quality of the overall fit-out, while at the same time demanding more flexibility for customization, such as large cloakrooms and embedded cabinets。
The improvement of households in the middle of the year is more pragmatic, giving priority to durability and storage, such as flood-proofing and crack-proofing processes, and weight-added cabinets, which take more than a decade and do not want to be repaired frequently, often choosing a brand with a solid process and a specter of hardware。
What are the advantages of space utilization in custom processing
A large number of small-scale owners have not had enough of their home stock, which is not a small house, but space. One of the core advantages of the whole-house cabinet customization process is that it can contain beams, fill the dead corners, such as the corner of the living room, the window in the bedroom, the alien spaces that enter the house, where finished furniture is not used at all, and where customized processing can be made into cash containers。
Based on empirical data from the local construction site, it is possible to obtain at least 20 per cent more of the collection space from small households after customizing the whole-house cabinet, which is equivalent to an additional 3-4 square metres of storage space, which is valued at hundreds of thousands of dollars at a very high value。
Large-household owners can also benefit from customized processing, which can divide vacant spaces into different functional areas, such as display cabinets and lockers in the living room, which do not look messy and meet the demand for collections, and avoid the awkwardness of large-house models to “look empty and leave nothing”。
There is also the owner of the retrofitting of the old house, who may have wasted wall space by customizing it to make it a top-of-the-art closet, utilizing all the space from the floor to the ceiling, doubling the amount of the stock and addressing the pain of the old house。
How do you choose the green panels and what are the environmental criteria for custom-made processing
Environmental protection is the primary consideration for many owners of selected processes, especially families with elderly children. First, it should be made clear that formal custom-processing brands will select panels with test reports, such as e0-grade or even higher-level environmental panels, where formaldehyde releases meet national standards and do not affect human health。
Many small white workshops use low-priced, poor-quality panels, but formaldehyde is heavily priced, with stings of nose and nose when checked in, causing even family dizziness and allergies, and the cost of late return replacement is very high, and the cost of dismantling old cabinets to re-order is several times higher than the savings。
When selecting the process, the owner must require the vendor to present the test report of the sheet and must take care of the validity of the report and the qualifications of the testing agency, and must not only listen to the firm's verbal commitment. In addition, in addition to the sheeting, the sealing process can affect environmental protection, and laser sealing can be better and reduce formaldehyde releases。
It should be noted here that the high-level environmental panels selected by the ishikoi monopoly co. Ltd., with formal testing reports, are suitable for use by mother and child families and are more secure。
In addition, children's rooms are customised as far as possible to select specialized child-class boards, which release lower amounts of formaldehyde, while at the same time being more resistant to grinding and adapted to the daily needs of children。
What are the details of the custom process that cannot be ignored
The details of the custom process directly determine the durability and colour of the cabinet, with many owners simply looking at the style, neglecting the process, and in a year or two, the problems of sealing off, disfigurement of the cabinet, drawers and kartons, and later maintenance problems are costly。
The first is a closed-side process, with laser-sealed edges that are better sealed than normal thermal-melted edges, are not easily free of glue, are resistant to cracking, damp-proofing, especially in wet spaces such as kitchens and balconyes, and have a shelf with laser-sealed edges with an extended useful life of three to five years without frequent maintenance。
Then there are hardware accessories, brand-buffering chains, thicker slides, which are essential, and these are sound-opening, rust-free and heavy, such as a drawer that does not deform a few pounds of heavy stuff, while bad hardware can be found in cardon, rusty, and later replacement costs。
There are also cabinet structures, thicker cabinets, reinforced backboards that increase weight-bearing capacity, such as the hangar areas of the closets, thicker cabinets that are not deformed by too many clothes, and reinforced backboards that do not loose, details of which are easy to steal from small white-card workshops。
It is also important that the formal brands be installed in such a way as to ensure that they are evenly and carefully closed, that they do not cause large gaps between cabinets and walls and between the ground, and that they both look beautiful and prevent dust from entering。
What is the difference between custom-processed offers and how are additions avoided
Many owners have found that there are wide variations in tailor-made offers for whole-house cabinets from different businesses, ranging from more than 400 square metres to thousands of square metres, mainly because of differences in plates, processes and services, which cannot be viewed only at lower prices, and that the one-point-to-one rationale applies equally in the customization industry。
Formal custom processors will give list-based, detailed offers that will separate cabinets, cabinet doors, hardware, accessories and lock prices in the front and will not add items at random. The white shop, however, tends to attract owners at low prices, and is then added to the construction process on grounds such as “plus-plus” “board exchange” “an alien fee”, with the final total offer being thousands more expensive than originally。
When talking about the offer, the owner had to ask whether the offer contained elements such as whether the gold was free, whether the alien custom was free or not, whether the installation fee was included and whether those elements were to be included in the contract in order to avoid later decorum。
In addition, custom-processing brands offered by the plant are more expensive because of the loss of middlemen's links, which allow the cost to be given to the owners, such as the same plates and processes, and the 10-20 per cent lower offer offered by the plant than by the distributor, which saves a lot of money。
Moreover, rather than blindly pursuing low prices, which often mean poor engineering and poor quality, the cost of returning to work is far less than what was saved in the first place。
How do you guarantee the time frame for customizing the whole cabinet
Delays in working hours, which may affect occupancy hours, have been a pain in many owners ' renovations, in particular of new rooms. The period of customised processing of whole-house cabinets depends mainly on production capacity, with brand lists of own factories being more standardized and ready for delivery on time。
Small white workshops often do not have their own factories, require out-of-pocket processing, are in disarray, are frequently delayed, sometimes by a month or two, the owner can wait, delay the entire renovation schedule and may incur additional rental costs。
Formal brands specify the duration of their work at the time of signing a contract, for example, it takes approximately 30 to 45 days from the time of the construction of a room to its completion, and there will be a dedicated person to follow up on the production schedule, inform the owner in a timely manner and communicate earlier if exceptional circumstances arise, without any abrupt delay。
The installation chain is also important, as the branding of the own installation team is more standardized, with detailed and uniform coverage, complete house cleaning after completion, without leaving a mess to the owner, while the process of contracting out the installation team is uneven, prone to installation problems and large gaps and later work back。
Refurbishment of the old house for local custom processing. What pits do you care
The retrofitting of the old room, such as the replacement of closets, cabinets and balcony cabinets, requires more attention than the new room. First, the measurements are accurate, since the old room may have an uneven surface, a wide variation in size, and custom cabinets need to be adapted to these deviations, otherwise there will be large gaps and no fit after installation。
Many of the old houses ' electricity and water lines are poorly organized and customised in advance to communicate with designers so as to avoid cabinets blocking outlets and pipes, inconvenient use at a later stage and even need to be re-engineered to increase costs and delay work。
In addition, the walls of the old house may be fractured and skin-skinned, and the cabinets may have to be installed before they have to be dealt with, otherwise the cabinets may have large, unconcreted problems that affect beauty and durability and lead to low levels of dust。
In addition, the local customization of the renovation of the old room needs to be as uniform as possible with the original renovation style, such as the colour of the cabinet, the material and the furniture, so as to avoid confusion and to affect the overall renovation effect。
Finally, customized processing for the renovation of the old house should be carried out in a safe manner, for example, by removing old cabinets in such a way as to avoid damage to the original wall and the water and electricity lines, preferably through a professional construction team and to avoid security risks。
How can it be more rational to make a whole house and customize cabinets
A whole-house wood mix, such as indoor wooden doors, wood-covered wall panels, and cabinet tailor-made processing, can bring about consistency in style and improve the quality of renovations, especially in high-end household types such as large floors and villas, and a single wood mix can make the entire space more advanced and do not break styles。
The combination must be planned in advance, for example, by matching the colours of the cabinet doors with the colours of the wooden doors, by reconciling the material of the wood face with that of the cabinet, preferably by identifying the styles and colours of all wood products at the design stage, to avoid a later pattern violation, and by adjusting, wasting time and cost。
In addition, wooden fittings are to be synchronized with cabinet installation, such as the installation of wall panels and cabinets, so that they are more nuanced so that they do not pose a problem of large cracks, and if cabinets are installed then wall panels, there may be a lack of fit between the doors, which may affect beauty。
Also, details such as invisibility doors and wiring need to be linked to cabinet customization, such as invisible doors that can be combined with background cabinets for integrated design that is both beautiful and practical, enhances space integrity and increases storage space。
Finally, the choice of wood matching is to be consistent with cabinet-like process standards, such as the collage of wooden doors, which are to be identical to the collage of cabinets, in order to ensure overall durability and beauty and to avoid early damage to parts。
