The watch is a very valuable thing for most people, so it's love. But it's always hard for us to get a bump on the watch in life, and it's even more difficult to accept it if we get water on the surface again, not even when it's dead. Today you are presented with a few behaviours that would cause “lethal” injury to the opponent's watch, which we can easily ignore, in order to avoid damage to the watch。
1. Hot showers and sauna with watches
Your watch doesn't matter if it's a waterproof wristwatch, swimming or even diving. However, no water-protective watch should be worn in a hot bath, a sauna bath or used in a highly volatile environment. The equipment will be severely damaged because of the temperature effect on the water-resistant ducts, which causes hot swelling and condensation of water into water and within the surface, and accelerate aging. Reminds me once again that no water-proof surface should be worn in hot baths, sauna baths or used in highly volatile environments. With regard to the wearing of watches in the seawater, it is said in part that seawater is very corrosive to general metals and other waterproof materials。
2. Watch is idle for long periods of time without hairs or batteries removed
Whether it is rocky or mechanical, long holds can affect or even damage its performance. If the stone watch is put on hold for a long period of time, the button battery dies, the leak corrosive electrocardial circuit boards are corrupted, and it is recommended that the battery be removed from the specialized clock repair point and that it be fitted and debugged when it is necessary to wear it again. The normal useful life of the quartz-based cardiac batteries is 2 years。
The mechanics of the watch are the discharge of kinetic energy by hair strips, the timing of which is carried out by cardiac gears, and the uneven distribution of oil for the lubricating parts in long periods of non-use, the drying up of parts in parts of the area, and the severe wear and tear of the cardiac parts when reused. Therefore, when placed on hold, it was recommended that the last manual operation with full power should be carried out in two to three weeks, so that the spare parts of the watch heart would remain in operation at zero。
The watch is not magnetic
This issue is often the most easily ignored and invisible threat. Because the heart is made of steel, we all know that steel can produce a little magnetic power when it comes to suction. It can seriously affect the operation of the mechanical heart. In everyday life, care must be taken to avoid magnetic fields, such as soundboxes, handbags, refrigerator doors, diaries, security scanners, etc. Once magnetized, it is required to be sent to a professional clock repair point for magnetic maintenance。
4. Long-term lack of professional maintenance of watches
The watch is also a machine that requires regular maintenance, which is very helpful in extending its useful life and maintaining its good core. The quartz watch is required to replace batteries on a regular basis and clean up, usually every two years, while the mechanical watch is required to wash oil, clean the machine's heart, with a general recommended cycle of five years。
5. Long-term lack of clarity on the appearance of the hand
We may have seen some stains on our wrists, some serious ones even falling off the surface. Because the watch is not cleaned for a long time. After long periods of wear, the watch is covered with sweat stains and impurities, slowly corrosive to the surface of the metal and damage to the original outer layer of the metal. How to clean it? The cleaning tool uses small cotton cloths, clean cotton balls, toothpicks, detergents, first removing the dirty material accumulated from the surface of the watch belt, then cleaning the stains with clean cotton balls and then drying it with half-dry cotton cloth。
