Hello, welcome toPeanut Shell Foreign Trade Network B2B Free Information Publishing Platform!
18951535724
  • Installation instructions for canon 4225 printer

       2026-04-15 NetworkingName910
    Key Point:Installation instructions for canon 4225 printerCannot initialise evolution's mail componentI. Photocopier drive installation1Select the 64 or 32-bit system printing driver according to the system; select " custom " selection " canon ir-adr-adr 4225/4235 ufr ii " add port "standard tcp/ip port " , enter ip address: 192. 168. 10. 17 q next step complete。Ii. Print processor direct installationComputer account settingSelect " start " to " dev

    Installation instructions for canon 4225 printer

    Cannot initialise evolution's mail component

    I. Photocopier drive installation

    1

    Cana 4225 maintenance mode clear

    Select the 64 or 32-bit system printing driver according to the system; select " custom " selection " canon ir-adr-adr 4225/4235 ufr ii " add port "standard tcp/ip port " , enter ip address: 192. 168. 10. 17 q next step complete。

    Ii. Print processor direct installation

    Computer account setting

    Cana 4225 maintenance mode clear

    Select " start " to " devices and printers " to " printer properties " to ensure that the " departmental id management" box in "designator settings" is not checked, tick " set user information " , click " set " click " set " to " default value settings " , enter a user name (this is a full spelling of a person's name, no space), select " confirm user information when performing a confidential printing " and " do not allow changes in a user name " options to be determined

    Select the "detail settings" ticking the "shorter job name" option in "equipment settings" to determine completion。

    Note for copier card entry

    Cana 4225 maintenance mode clear

    * for the first time a photocopy machine is used, please install the above-mentioned steps and then use a personal door-bar to set it on the photocopier。

    For the first time, press the energy saving key, select the "user name" to land, enter a full spelling of the personal name (corresponding to the user name entered by the computer) with an initial password of 123456, and, after landing, select "intelligence control" to "register" the "personal setting" "ic card settings" to "registrate" the personal doorbar to the card induction area, display the card information and "establish" it。

    2. Once the card information has been entered, subsequent landings can be printed directly on the card. (a computer printing requires a card to determine the information to come out, and only a card that corresponds to the user name of the printed computer must be used.) it is recommended that the personal password be changed on the photocopying machine after the initial landing, as the personal account code can also be printed。

     
    ReportFavorite 0Tip 0Comment 0
    >Related Comments
    No comments yet, be the first to comment
    >SimilarEncyclopedia
    Featured Images
    RecommendedEncyclopedia