The safety management system is responsible for the safety of production: it defines the duties and responsibilities of managers at all levels, departments and staff at all levels, and establishes a comprehensive system of responsibility. (c) a training system for safe production education, which sets out the requirements for the purpose, content, modalities, periodicity and appraisal of the training, ensuring that the construction personnel have the necessary safety knowledge and skills. The system of safety inspections: it includes the types of inspections (regular, specialized, seasonal, etc.), the content of inspections, the frequency of inspections, the modification of problems and the review thereof. Control system for the detection and detection of hazards associated with safe production accidents: establishment of work processes for the detection, registration, assessment, management, monitoring and inspection of accidents, and timely elimination of accidents. Safety incident reporting and handling system: specify procedures, content, time requirements for accident reporting, and specific provisions for accident investigation, handling, closure, etc. (b) safety technology bottom-out system: requires technical staff to provide the construction personnel with the content, methods and requirements for safety technology bottom-up prior to the construction of the sub-sector works. Security of production funds: to ensure the investment, use and management of funds required for safe production, to ensure that funds are earmarked for the construction of safe facilities, the acquisition of safety equipment, safety training, etc. (c) regulations for the management of labour protection items: the regulation of the procurement, acceptance, issuance, use, replacement and end-of-life of labour protection items, ensuring that construction personnel properly wear and use standard labour protection items. Fire safety management system: covers fire-fighting facility set-up at the construction site, fire corridor set-up, fire operation management, storage and management of flammable and explosive materials, and fire emergency preparedness. Temporary electrical management system: includes preparation, approval, installation, use, maintenance and repair of electrical equipment, electrical safety protocols, etc. The security management agency and the security management agency for personnel information set up a document to clarify the composition, responsibilities and division of labour of the security management agency in the construction unit, to be issued as an official document. Qualifications of security managers: including copies of relevant qualification certificates (a certificate, b certificate, c certificate) for safety officers such as project managers, professional security officers, etc. List of special operators and certificates: a list of all special operators (e. G. Electricians, welders, rackers, pedestal drivers, construction lift drivers, etc.) at the construction site, with a copy of their special operations operating certificate. (b) training programme for training in safety education: in accordance with the construction schedule and the characteristics of the personnel, a detailed annual or staged training programme for training in safe work, specifying the objectives, content, target, time and location of the training. Training materials and records: various security training materials, lectures, course packages, as well as a check-in form for each training, training records (e. G. Training content, training hours, training of teachers, participants, etc.). Examination of papers and records of achievement: the examination of papers and records of achievement after completion of training should serve as an important basis for the induction of construction personnel. Staff safety education files: a separate security education file is created for each employee to record information on the time, content, performance of the training, etc., for tracking and searching purposes. (c) technical security measures in the design of the construction organization for the construction of safety technology: in the design of the construction organization, appropriate technical safety measures, including construction safety protection, temporary installations and the safe use of construction machinery, are developed for the characteristics of the construction, the construction process and the construction environment. Specialized security construction programmes: for sub-projects that are more dangerous (e. G. Basic pit support and precipitation works, earth excavation works, template works, crane works, scaffolding works, etc.), special security construction programmes should be prepared and approved and expert validation should be conducted as required. (c) recording of safety technology: prior to the construction of the sub-sector works, the technical manager will conduct a detailed safety technology submission to the construction personnel, which will include a project profile, construction methodology, security technical measures, quality standards, attention, etc., signed by both parties and confirmed and archived. Security facility design and receiving and inspection information: design of safety protection facilities at the construction site (e. G., perimeter protection, hole protection, scaffolding, construction lifts, etc.) and organization of acceptance and inspection after installation, resulting in acceptance and inspection records and related information. Security checks and security records of hazard screening information: these include records of all types of inspections, including periodic security checks, special security checks, seasonal security checks, which include the time of inspection, inspectors, inspection sites, problems, overhaul requirements and durations. (c) risk screening and management desk accounts: register the risks of security incidents detected in the platoon and establish a desk to record detailed information on the timing of detection, content, level of exposure, corrective measures, rectification of those responsible, completion of renovation and review. Reorganization notifications and responses: a letter of correction is issued in writing to address the problems identified during the inspection, specifying the requirements and the time frame for the correction, which the construction unit shall complete within a specified period of time, and shall reply in writing with supporting information such as a corrected photograph. Security incident management information incident report recording: in the event of a safety incident, information on the timing, modalities, content of the incident report and the units and personnel receiving the report shall be recorded immediately and in accordance with the prescribed procedures and time requirements to the higher authority, construction unit, supervisory unit, etc. Information on the handling of accident investigations: including information on the founding documents of accident investigation teams, accident investigation reports, accident management decisions, and opinions on the treatment of those responsible for accidents. The accident investigation report should include a detailed analysis of the cause, history, loss and determination of liability. Incident contingency planning and exercise materials: development of safety incident contingency plans for production at construction sites, including integrated contingency plans, specialized contingency plans and on-site disposal programmes. Regular emergency drills are organized to document the timing, location, content, participants, impact assessments and revisions to contingency plans. Other security management information site security floor layouts: security floor layouts for the construction site, showing various temporary facilities, security protection, fire protection facilities, construction machinery, material stacking, and evacuation routes such as safe passages, fire escape routes, etc. Security equipment and facility billing: establish security equipment and facility billings and record information on their name, model, specifications, quantity, acquisition time, location, operational status, maintenance records, etc. For effective management of security equipment and facilities. List of relevant laws, regulations and standards: compile, compile, compile and update the list of laws, regulations and industry regulations relating to safe production, and ensure that the construction process complies with the latest legal and regulatory requirements. Records of security meetings: records of the various security meetings held at the construction site (e. G., security regular meetings, security thematic meetings, etc.), including meeting time, venue, facilitators, participants, conference topics, discussions and conference resolutions. Safety awards and penalties: recognition and awards for establishments and individuals that have performed well in the field of safe production, penalties for violations of safe production regulations, information on the subject, cause, amount and time of safety awards and sanctions, in order to motivate construction workers to participate actively in safe production。
