That's because we have a bubbler installed on the head of our faucet。
By definition, you add bubbles to the water. This will prevent the splashing of water and will also expose the area of exposure to water and skin (goods), making it more comfortable and less water-efficient。
The bubble lifter is a multilayered network structure that used to include bubbles in the water and also serves as a filter in intangibles. So it's gonna take a while to clean up and prevent the water flow from getting smaller as a result of congestion。
When we find the water is small or there's not enough bubbles, it's time to clear it。
A strong person can try to break it with his bare hands and a small person can use tools such as pliers. The consequences of the blowing up of my house have seen a lot of small stones, and the water has returned to normal once it has been cleaned。
. 02 with a small flow of water
When i finished with the taps, i thought my family's flowers would spill very little water. And then, of course, the flowers came out of the water, and this was the scene
The edges of every outlet are filled with white water。
But it's more difficult to clean up, and i've looked at how to do it: most of the water is silica, so we press our fingers and we can clean it up。
It's a special kind of increase
It has a metal filter between the flowers and the hoses, and we need to remove the hoses so we can get back to normal。
. 03 thermal water flow is small - normal/unnormal
This time i looked at the comments of a lot of netizens, and i found that a lot of people said their homes were running small hot water. And there's one thing in common with this type of user: the electric water heaters are used at home。
Hot water flows are smaller than cold water, in two cases:
• one is normal, small, but not too small. This is due to the installation of a firewall on the electric water heater, which is accompanied by thin and bent pipes that have an impact on water pressure. There are no solutions, but the impact will not be significant。
• the other is the failure of hot water, which is much smaller than cold water and does not even produce hot water. That's because there's so much water in the electric water heater that it's blocking the outlet --
At this point, it is necessary to have the after-sale staff come to the door and clean up the water from the water heater. Moreover, such problems mean that the quality of water in the home is too hard and that, in future, water should not be too hot。
. 04 the whole house is running small - two possibilities
If the whole house is running water, whichever room, whether the tap or the flower, whether cold or hot, the water is running small — does that mean that the water supply is under stress? The answer is not necessarily
There are two other possibilities:
The 1st valve is not fully open (as the property manager says is the case with my neighbour), and our total valve is not a ball valve that can be rotated at 90 degrees, but a cut-off valve. That's what it looks like
Such valves need to be rotated several times before they can be fully opened, and the neighbour's house is a little open, and it feels like it won't open when there is water. At this point, the valve is in a semi-open state, blocking a large part of the current and the water pressure in the house is certainly insufficient。
2 with pre-filter
Some users are more “growthy” and feel that filters are better filtered with a finer aperture. It is not clear that too small an aperture can affect water pressure, and it is recommended that the choice of a pre-filter be 40 or 60 m。
There are also users who are more “slazy” and who have not been connected with filters since they were installed. But after a long time, the filter was almost blocked and the water couldn't get past it. This problem can be avoided by the existing pre-filter, which has a back-washing function, which is applied semi-annually。
Obuchi
Self-censorship + network (absorption)
