The case that was shared today is the benz-smart, also known as the elf, a small car that we built today, whose main failure was the failure of the fire, the failure of the fire, and the breakdown of the dashboard, which was a specific case when he arrived. The client also gave us a specific description of the state of affairs at the time of the malfunction。
The client said: “at the mall yesterday, when she started to get ready to go, after the slot went up, it went off, it went off, it went off, and then i went to the place, and i cleared the failure code, and then i cut off the power, and then he went to a self-study after it went off, and then they said there was an emergency solution, and then the pole didn't come out, and then it was like this.”
It's on
The car reported a malfunction, and now it's checked down and it's discovered that the clutch pump is not back in place. The initial suspicion is that the clutch and the subpump implementer are in trouble. Let's do the next decomposition check
Fault code
This little elf's gearbox, it's been opened, he's a back-up, he's got his engine and a gearbox behind the car. Let's see what's wrong with this gearbox。
Clients' concerns
How much did the mercedes-smart gearbox get fixed, for example, thousands of dollars, without particularly expensive maintenance costs。
What kind of problems does smart usually have when driving? One of the most common things about this car is that it's free to turn when it speeds up, and it feels like it's slipped in a manual gearbox。
He's a gearbox that looks like a manual block structure, and that's what happens with the clutch and the voltage, and when he's taken it off, he finds that it's completely worn out, and that's how it works。
A worn clutch
Let's look at the figure, the rubber part of the finger would have been able to stretch back and forth, but now we can't go back, so why not check。
Executor cannot return position
Our technicians suspect that the clutch is completely worn out, so that all the overloading of the implementer can not be lifted back. In the process of dismantling, our technicians suspected that the car was broken, that there was a problem with the car, and then a female client drove it, and it was a problem to use it, and it was too long to be broken, and it was too late to go。
Dismantling executor
When we look at this picture, the first one and the second one are connected, the work overload has broken his axle, then the broken axle has gone into the brakes in figure iii, and it has been stuck, and this failure starts with severe wear of the clutch and the drying of the brakes after a long period of work. Therefore, when you feel that your car is in trouble, it should be inspected and repaired in a timely manner, not until the problem is so serious that it will be expensive to repair it, so if your car crashes, you and your car must be consulted as soon as possible。
