What are the parts of the transvestite? What's the effect of all the parts of the direct-turner

The principle of frequency converters is the conversion of the industrial frequency power source into an electrical power control device at another frequency using the break-up of the electrical semiconductor device. T-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-p-t-t-t-t-p-t-t-p-t-t-p-t-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-。

The main circuit of the trans- straight-transformer consists of three components: the current main circuit, the intermediate circuit and the reverse circuit。

1. Main circuits, which provide a voltage-adjusted fm power source to the arctic motor, can be broadly divided into two types of main circuits: the voltage type is the conversion of the direct flow of the voltage source into an interactive transducer, and the filter of the direct flow circuit is the electrical capacity. The current type is the conversion of the current from the current source to the interactive transient, and the direct flow-back filter is the electrical sense。

2. Intermediate circuits, transformers of the integrator diode, which converts the industrial frequency power to a direct current power source. Two sets of transistor transformers may also be used to form reversible transformers, which, because of their reversible power orientation, can be regenerated。

4. Inverse transformers, contrary to the inverters, are the conversion of the direct flow power to the communication power required by the required frequency, so that the six switches are capable of receiving a 3-way exchange output at the specified time. An example of switch time and voltage wave shape is a voltage pwm reverser。

T-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-c-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t-t- it differs from the normal frequency variant, does not communicate the flow to the straight stream and vice versa, and is a cross-turn structure, which is typically used in large power devices。

T-r-t-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-f-

1. The main circuit integrator may use six double-turner transformers or two three-way decomposition transformers。

2. The electrons and transformers use a two-y bridging structure to form a 12-pulse waveform, which significantly reduces the amount of harmonization. Each set of transformers and transformers can be operated at full half-speed, with greater applicability and flexibility。

3. Synchronization of motor-monetization with irreversible transistor three-phase full-control bridge control and protection of circuits, in addition to a high-volume-pressure-sensitive resistance absorption circuit, is accompanied by a dedicated fast-protective circuit for diode bod detection and the control of the transistor switch。