Friends want to know how to raise wood? Let's look at the summary answers. I hope they'll help you。
Plumbing is carried out in separate strains or adhesively, with the choice of fattening and air-absorbing soils, and then, in due course, with a smooth seeding of the leaf, and with a live water fertilization, which is replaced every two years。
I. Growing habits of wooded plume
The wood is of south african origin, mainly in africa, particularly in the arid areas of southern africa, and also in southern asia. With strong drought and cold resistance, intolerant water, soil overwet, prone to root decay, normal growth rates, high temperatures and fear of cold, growth ceases when temperatures are reduced to 15°c and begins to die below 0°c, so that the northern region needs to grow large sheds or indoor pellets. High light, growth requires plenty of sunlight, air, suitable for growth in air-transmitting, water-leaving sandy soils, low fertility, mainly organic fertilizers, supported by trace element fertilizer。
Ii. Methodological methodology
1. Divisional plants: it is most appropriate for the first and second quarters of the spring and the second quarter of the autumn, when temperatures range from 20 to 25 degrees c, when new plants are born, to remove the plant from the soil, remove the soil from its roots, and plant the seedlings from the mother's body into the soil with disinfected blades, so that the water can be poured into the soil and the roots can be created within a month or so。
2. Plug-in: the wood piping chooses clear weather to cut off or cut the lumber from the centre of the penis by 8 to 10 centimetres of sprouts, stripping five centimetres of leaves at the lower end of the end of the line and placing them in a cooler ventilated place, before they are dried, into the soil, in a warmer place to avoid the wind and rain, so that the roots are watered out, and the roots grow within a month or so。
Iii. The methodology of the ground
1. Battery soil: the pellets of wooded pellets must be water-bearing, fattening and ventilated, with values ranging from 6. 8 to 7. 0, usually with corroded soil and field and river sand (scale 2:1) and then with 40 per cent of ff, then with a plastic membrane seal for two days, and then with a drying。
Upper basins: it is better for wood to go up in spring and summer, with indoor temperatures ranging from 15 to 28 degrees celsius. Put some shredded tiles on the bottom of the basin, so that the water can be drained and gasped, then fill it with well-equipped soil, select a sapling, place the moss in the basin, stretch the roots, then lift the mosaic up, hold it down, hold it up and pour it out。
3. Slow seedlings: when growing wood, special attention should be paid to slow seedlings, which may not be watered or fertilized until they return to youth, otherwise they may rot. It is also impossible for the wood platinum, which is just in the basin, to be exposed to sunlight, during which time leaves are often sprayed to speed up recovery and rooting。
Fertilizers: the normal growth of wood platinum requires nitrogen, phosphorus, potassium, boron, copper, zinc and organic fertilizer, which is generally administered by liquid or leaf-faced application, which is applied every half-month to one month in the spring and autumn at a faster rate, but should be discontinued during the hibernation period from november to march of the following year。
5. Watering: although the wood is drought-resistant, a proper and reasonable amount of water is required, both in the morning and in the evening, usually once in 15 to 20 days, on the principle of “dry and wet and dry”. During the summer, water can be sprayed on the mosaics to keep the leaves green and to prevent the sun from burning。
6. Change basins: in the second or so year, wood luminum is grown, preferably in the spring, and the wood luminum is placed in a larger new basin, together with the earth, then added to the new soil, compacted and watered, placed in half-basin and then moved to sunlight。
Patients: pests are not easily encountered and diseases are rare. However, in a bad environment, diseases such as black spots occur in the leaves, where 77 per cent of the seeding period can kill wettable powders or 75 per cent of the bacterial wettable powders 1,000 times the fluids, one in 15 to 20 days and three to four in a year。
Through the above-mentioned introduction, we now know the method of raising wood gills, which have been medically tested and produced many active ingredients, and leaves can be processed into healthy foods or cosmetics, in addition to raw food, and, because of their ease of handling, suitable for domestic food。
What's the method of raising the calf
In the case of gills, well-watered soils, such as grasswood as ash can be added to the soil in planting, growth temperatures should be contained between 5 and 15 degrees, and water should be sufficient, but water should be avoided in order to avoid rotting roots。
I. The methodology of collection of the greenhouse
Cultivation can be carried out by cuttings and strains。
1. Plugging. In the spring, between march and april, they cut the top end of a strong old plant for an intubation of 10 to 15 centimetres in length, cut the leaves on both sides of the base, put them in the shade for two to three days, dried them up slightly, inserted them in the cultured soil, and kept the pelvis wet for 20 to 30 days。
2. Division of strains. Every spring, when the basin is changed, the plant is removed from the old plant and planted separately. It is necessary to control the watering of the new larvae, which in the summer is placed in an outdoor ventilated, semi-vaginal area, which is watered daily in the afternoon, and to maintain temperatures above 5°c in the winter, where the indoors are dry and sunlighty。
Ii. Conditions for the forming of the ground
It is a tropical plant that is timid, but it is also a good living plant. Of course, in order to grow fast and grow much, it is necessary to grow carefully in accordance with its characteristics。
1. Soil. The thorium likes to grow in pine soil that is well drained and difficult to board. General soils can be mixed with some gravel ash, and it is better to add foliage ash. Poorly ventilated soil causes the disruption of root breathing and the deterioration of the roots, but excessive sandy soil tends to cause loss of moisture and nutrients and poor growth of thallium。
Temperature. It's cold, and it's long-lasting. When growth stops at around 5 °c, at 0 °c, the life course is impaired and if it is below 0 °c, it is frozen. The most appropriate growth temperature is 15-5°c and the humidity 45-5%。
Water. Like all plants, gills need moisture, but they're the ones who fear water. During the rainy and wet season or in the event of poor drainage, leaves can easily shrink, branches rot and die。
Photos. It takes plenty of sunlight to grow, and it needs to be noted that the primary plant is not tanned, preferably only in the morning, and that it will not be able to grow in sunlight for another 10 and a half days。
5 fertilizer. Fertilizer is indispensable to any plant. Americium requires not only potassium nitrogen phosphorus but also some trace elements. To ensure that beryllium is a green natural plant, maximum use should be made of fermented organic fertilizers, such as bread, chicken dung and composting, which are more suitable for the cultivation of beryllium。
Iii. Pyramid farming methods
The family pellets are ready to take fresh leaves for family members to eat, to take medicine and to make beauty work. The viewers, small planters are placed on the desk and desk to improve the living environment. The large planters are in the living room and in the courtyard, and they are very interesting. Family pelvis and field plantations have different ecological environments and are confined to small basins. In order to meet as much as possible the requirements of the environment in the growth and development of the plume, such as water, fat, gas and heat, it is important to promote the normal development and growth of the plume by the scientific preparation of suitable pelvis for the family。
1. Formulation of the soil. The pelvis should have good performance in drainage, water conservation, ventilation and fatting. The usual formulations of the pelvis are: corrosive matter, horticultural land, river sand ratio of 2:1. Replace river sand with wood crumbs or coal ash, with no change in proportion. Ph6. 8-7. 0 is generally required for cylindrium, which prefers the alkalinity of the plant-based alkalinity that grows in a neutral environment. In addition, the pelvis is required to be relatively clean, so that soil disinfection and sterilization can be performed at the required speeds。
Selection basins. From the mass of the flower basin, there are mud basins, purple sand basins, china basins, plastic basins, etc., and the right plant is selected according to personal preferences and aesthetic interests. A well-ventilated mud basin is the most suitable place to plant argon. If a new basin is chosen, the water should be immersed, otherwise the basin will not be easily permeable by watering it and the half-dry and wet pellets will cause new root damage. In the case of old flower basins, the soil residues and mosses should be washed and dried in the sun, both to increase the air permeability of the basin and to prevent pests and diseases。
Three, go and change
One up. Pre-basket seedlings are important, strong seedlings, short and thick leaves, dark and green, with more than four roots。
What is "up-to-date": the process of planting well-bred seedlings into the flower basin is called up-to-date. The first one was the beginning of the plant, and the process was bad and closely related to the growth and development of the late plant。
Time up: in spring and summer. The indoor temperature is more appropriate at 15-18°c. At the right temperature, rooting is fast, and the return time is short. It is inappropriate to enter the basin in the winter, and the temperatures are too low to allow new roots to occur, and even the “crushing heart” of the seedlings to die。
Pre-basket approach: put a piece of debris at the bottom of the basin before the upper basin, pressping on the perforation hole at the bottom of the basin, both to maintain drainage and not to release the soil from the basin. When you go to the basin, put the seedlings right in the middle of the basin, stretch the roots as much as possible, fill the soil with the roots, lift the seedlings up a little bit and hold them down a little bit, so that the roots are close to the soil around the basin and the soil is solid, and then add the ground to the basin until 2 to 3 centimetres are maintained along the basin, so that the seedlings are as good as possible. Finally slowly watered the basin。
Post-basket management: just-in-basin beams don't let the sun shine in order to avoid loss of water and excessive nutrient consumption. They should be preserved in half-shadows and then moved to the sun before they take root. It is not appropriate to pour more water, let alone fatter, until the pelicans return to their roots. It is highly susceptible to rotting roots when the soil is wet. It's usually dry or dry. After rooting, water can often be sprayed on the leaves, accelerating the return to the roots。
Two shifts. It's usually a one-to-two-year switch. It's good to switch in the spring and in the autumn of september and october. When changing basins, it's important to have the right debauchery. You're going to have to keep a good raisin as long as you can. You can turn the basin upside down, hold your left hand over the ground, and the right hand's hand cracks down a few times and the basin is naturally separated from the old ground. They then move the corsets together into the larger new basins, then add new pellets of soil around the new basins, then crush the pellets and pour water. After the change of basins, it will also be necessary to maintain half-vaginal areas for a period of time, before moving to sunlight after a complete lull。
Iv. Resources management of the ground
1. Fertilization
Fertilizers can be classified as organic and inorganic. Organic fertilizers have a more comprehensive nutritional component and are less effective. Inorganic fertilizers, known as fertilizers, such as commonly used ammonium nitrate, urea, ammonium diammonium, have high active ingredients, high fertility, low usage and better application in combination with organic fertilizers. In order to ensure the quality of beryllium, fertilizer is not applied as much as possible。
Fertilizers are applied in both the application of base and the pursuit of fertilizer. Organic fertilizers are often used as base fertilizers, which are fully blended with the pelvic soil before loading. The ratio of the general basin soil to organic fertilizers is about 10:1 and is blended into the basin and fed together, and organic fertilizers must be fully fermented, otherwise there will be burning. Fertilizers are used after the basin is filled and the fertilizer is diluted with liquids. The water is generally distributed using bean cakes at concentrations not exceeding 50 per cent or a 50 per cent horse hoof solution. Fertilizers should not be too thick, otherwise they would be “fat”. Fertilizer concentrations should not exceed 0. 1 per cent, especially when exhilarating by leaf spray. Every 30 days or so, and depending on the growth of the calf and the seasons, it can also be followed, generally by faster springs and autumns, with an appropriate increase in the number of fats, slower winters, less or no fertilization。
Watering
The capacity to withstand drought is so strong that three to five months of water is not dry, but growth is inhibited, leaves dry and juicy and the value of utilization is reduced. And overwatered and the soil damp for a long time, it rots and eventually dies. It is therefore necessary to be flexible according to the different growth, developmental stages and natural conditions of the plant, if the surrounding air is very wet and evaporated with low evaporation intensity, and if the air is dry and hot and the air is in strong circulation, it must be watered in time to prevent the soil and leaves from being lost too quickly. Dry and wet, dry and draught, and rational water。
Large basins are being watered in large quantities and in large numbers during the growing season. Spring and autumn temperatures can be poured in 5-7 days at 15-25°c. High summer temperatures and high evaporation can be used for two to three days, and proper water can be sprayed on the leaves every morning and evening, with care to prevent suntan. It's good to dry up the soil properly, and it's good for the plant to get warmer。
Watering time: spring and summer should take place in the morning and evening and winter should take place at noon. Water should preferably be watered from deep wells or rain, and running water should be sunken and reused. Water is watered to the pine soil so as to reduce evaporation and facilitate new roots. The pine soil may be made of single teeth or cogs made of bamboo and barbed wire no. 8, with a depth of 1. 5 to 2 cm. The pine soil can cut the catheters and keep the pelvis in the optimal water state。
3. Winterization management
The pelvis at 5 °c is stunted, cold at temperatures below 3 °c, freezing leaves at below 0 °c, and lastly death. Therefore, in one part of the country, the maintenance of above 5°c requires corresponding measures of temperature protection. The pelvis can be moved to indoors or greenhouses for winter. To control water and light, the basin could be placed on the wind-shielding south balcony. If the humidity is low, it can be moved out after 9 a. M. In the middle of the morning and indoors by 3 p. M. In addition, a transparent plastic bag could be installed outside the plant, which would allow both sunlight to be injected and increase temperature and humidity, with excellent results。
Through the above-mentioned introduction, we now know what techniques are used for the breeding of gills, which are tropical plants that fear the cold, but also the good ones, which are very alive and well nourished, and which grow in the nature of sunlight, but fear the sun, wetness, water, high temperatures and cold。
Are you aware of the method of raising the wood? Welcome to your friend
