The car lighting system is the eye of the vehicle and provides an important safeguard for the safety of the vehicle, of which the vehicle's proximity light is a key component. Understanding how cars work and how they are used in different contexts is essential for proper driving and vehicle safety。
But many car owners find that they sometimes encounter a situation where the car's remote light is lit at the same time. This may be confusing and disturbing for the owner, and today we will look at the reasons for this problem and how it should be addressed。
I. The answer to whether the close-lights are extinguished is different when the different types of lights turn on
Before we look at “aromatic circuit mechanics: so that light can be lit at the same time”, we need to first understand how cars work on remote light. As a general rule, when we turn on the remote light of a vehicle, the close light will be extinguished accordingly because the system is designed to avoid interference with the lighting of other vehicles。
But there are some special types of car lights that don't go out, which leads some of the car owners to see that the light is still on, causing a bad driving experience, and then we'll see if the light goes out when the light turns on。
Ii. Differing types of lights and openings
01. Halogen lamps in close light
Long-range light halogen lamps are a common light system in modern vehicles, designed to incorporate long- and near-light functions, which can be changed by changing the light beam direction of the light bulb. But such lamps are usually designed to place close-light lamps in a light bulb with distant lights, so when they turn on the long-light, the light will be extinguished as the light inside them changes in direction。
The advantages of close-to-light halogen lamps are to save space and simplify the design of light systems for small vehicles or vehicles requiring space savings。
Two-ray lens lamps
A two-ray lens lamp is a design to achieve remote light switching through optical principles. Unlike the traditional light bulb design, the two-light lens lamps use a special lens design that allows for the transfer of light from a distance by changing the optical shape and direction of the beam, in which there are usually two different lenses for distant light and near light, and when the light is turned on, the light light is also activated at the same time, thus creating a brighter lighting effect。
3. Remote proximity photometry lamps
For split lamps, they are designed to separate long-light lamps from near-light lamps into two separate components. Based on the design of different models, some of the lights may turn on the remote light, choosing not to light the light at the same time, but rather to switch to the remote light switch. This is usually due to cost considerations and simplification of light systems。
However, some high-end vehicles, or custom-modified vehicles, can still use dual-light lenses or other technologies to provide a light-lighting function that is far and far away to provide better lighting。
Air-gas-type car lamps
The thorium lamps are a common car lighting device with a higher brightness and longer lifetime than the traditional halogen lamps, which need to be kept constant when the distant light is activated to ensure that the lighting of the vehicle is not affected, and the light of the thorium lamps is more widely distributed and evenly distributed, so that, even when the distant light is opened, the near light does not affect the sight of other vehicles。
Five leds
The led lamps are a new type of car lighting, employing led technology, which has a higher brightness, lower power consumption and longer lifetime than traditional halogen lamps and led lamps。
When you turn on the long-lights, the near-lights will follow different design formats, either choose not to light them at the same time, or choose to turn on both the short-lights and the long-lights to provide better lighting, for example, when the high-lighted leds usually turn on the light。
As can be seen, the lighting of the led lights is very good, with the use of both long-lights and near-lights providing sufficient light to ensure the safety of the vehicles, and when they are turned on, the near-lights will also be activated, so that the area of light on the road will be larger and the dead corner of the light will be avoided。
Iii. Built circuits: this way, the light can shine at the same time
(1) proximity light brightened at the same time
1: light characteristics
The proximity light is a special lamp designed to allow vehicles to light up long distances at the same time as they are travelling. The reason for this design is mainly to increase the visibility and safety of the vehicle, as in some cases the light of a vehicle's long- and near-lights is likely to be lit at the same time, which may affect the eyes of other drivers and create safety risks。
2: the national standard allows the manufacturer to refuse design for cost reasons
In order to reduce costs, some models may choose not to light long-distance light at the same time, which may affect the visibility of the vehicle in certain circumstances and present a security risk。
In this case, the electrician has also made proposals for modifications, for example, if you want better lighting, you could consider using some of the modifications or improvements to make sure that the light is lit at the same time。
(2) built circuit mechanics: so that light can be lighted at the same time
Retrofit option 1: disconnect the luminous luminous tube off
If you want to be able to light a remote light at the same time, it can be done by disconnecting the light from the light tube switch. First, we need to find the vehicle's remote light switch, and we need to cut it off to make sure that it doesn't light。
And then you find the light tube of the light and connect it to the power supply. At this point, the light will be lit, while the light will not be lit, so that the light can be lit at the same time。
Retrofit option ii: installation of relays to enable light switching
Another way to achieve the simultaneous lighting of the remote light is to install a relay that allows for the switch to light. First, you need to find a light control line for the vehicle and connect it to the input end of the relay. The close light and the distant light are then connected to the output end of the relay and to the power supply, so that, by switching the state of the relay, the distance light can be switched to, for example, by opening both the longlight and the near light。
End
The problems of proximity to the light are determined mainly by the characteristics and design of the light, and different types of lamp may react differently when the light is turned on, with some lights likely to go out and others likely to be lit at the same time. In the use of vehicles, the owner should choose the type and mode of use appropriate to his or her circumstances and needs in order to ensure safety and comfort。
In the future, as car technology progresses and develops, we may see more innovations and improvements, such as a more intelligent light control system that automatically adjusts the opening and closing of remote light to the condition of the road and the environment in order to improve safety and ease of travel。
