While wood furniture is one of the more popular home products today, there are divergent claims about painting of wood furniture, some believe that it is more beautiful to paint it, but some believe that it is better to keep the twilight color, let's look at the steps taken to paint wood furniture and the attention given to painting of wood furniture。
I. Step for painting wood furniture
Step i. Base materials preparation: at the time of construction, the surface of the object shall be flat and smooth, with dust, oil, stains removed and polished with suitable sandpapers, and with fur pricks removed and polished。
Step 2. Placing paint: the paint can be evenly mixed. The diluent, solidifier is added proportionately to the main paint for mixing, and the mixture and liquid mix are evenly balanced, and are kept in place for 10 minutes and then painted or sprayed。
Step iii. Paint construction: the treated wood base surface shall be coated with 2 to 3 rows of polyester wood transparent (white) base paint and 1 to 2 rows of polyester wood varnished (white paint). The surface of contact between each coating requires a light grinding of suitable sandpaper. Construction methods: painting in the direction of wood lines should be done to reduce the production of bubbles by painting them (preferably using wool brushes) or spraying them (nozzle mouth diameter: 1-2 mm, air pressure: 0? 3-0? 4mpa) in order to achieve a good decorative effect. The mix shall be completed within four hours。
Ii. Attention to painting of wood furniture
1. Prior to use, the paint in the tank shall be fully modulated, with the required ratio, and the construction shall be carried out after 10 minutes。
2. At the time of construction, do not dilute in such a way as to affect the quality of the paint membranes as to ensure good painting。
3. After the paint has been made available, it shall be exhausted during the period during which the paint is usable。
Four, not too thick at a time, otherwise bubbles, oranges, leash, slow drying, etc
5. When the cans are opened, they are not fully used at all and have to be resealed and stored in the shade。
Iii. Construction taboos
1. Avoid construction at low temperature (5°c) and high humidity (80%) of the environment。
2. Prohibition of construction when bottom materials are damp (10% water content)
3. A one-time shaving of grubs is prohibited and must be thoroughly polished after drying。
4. Each painting room shall be completely dry and polished to no bright spots for further construction。
5. One-time thick coatings are strictly prohibited, otherwise they will lead to the whitening of the paint。
6. Nitro-painting is strictly prohibited and polyester paints are accompanied by noodles。
