This practical novelty deals with the technical field of fruit harvesting, in particular a fruit-growing harvesting device。
Background technology:
Fruit pickers are a tool for fruit extraction, large fruit pickers and small fruit pickers are available on a single person basis, and fruit pickers are a tool for automatic extraction of fruit from trees at a low point, without the need to climb and operate easily。
The traditional fruit pickers, which are equipped with a pick-up device such as a plough at the bottom of the top of the pick-up head, are not easily disassembled, and the handle of the pick-up device is long, and the weight of the fruit piled up at the head of the pick-up is heavier. The greater the grip at the end of the handle, the greater the leverage principle, the greater the pressure on the arm of the picker。
Technical realization elements:
A fruit-growing harvesting device proposed by this practical novel addresses the problem that the traditional fruit picker will install a pick-up device such as a plough at the lower end of the top of the pick-up head, which is not easily disassembled, and that the handle of the pick-up device is long, and the weight of the fruit accumulated at the head of the pick-up is heavier, and the greater the grip at the end of the handle, the greater the leverage method, the greater the pressure on the arm of the picker。
In order to achieve the above, the following technical programmes have been introduced:
A fruit-growing pick-up device consisting of a handle, a pick-up head and a long burrow, the fixed connection at the bottom of the said pick-up head has a contours, the top wrap of the said longbrow is on the outer surface of the contours, the bottom of the said longbreath is connected with a bag, the fixed link on the edge of the basket to the top of the said bag is linked with a bag link and the top lock on the axis of the said bag link is secured on the outer surface of the handle。
On the preferred side, the outer surface of the pick-up head is provided with a screwdriver, the internal cord of the screwdriver activity of the said screwdriver has a screwdriver, the top of the said screwdriver has a screwdriver and the activity of the screwdriver is embedded in the outer surface of the pick-up head。
On the preferred side, the outer surface of the said screw has a short axis, the front end of the said short axis has a pressure plate and the outer surface of the said pickhead has a slot matching the short axis。
On the preferred side, the internal fixed connection of the said spiral activity slot has a square locator axis, and the internal establishment of the said screw has a square slot matching the square locator axis。
On the preferred option, the upper fixed connection to the handle in question has a connector and the extract head in question is attached to the end of the connector。
Compared to the available technology, the beneficial effect of this practical new approach is that the device not only directs rough and heavy fruit, such as oranges and apples, to the bottom of the handle at the time of harvesting, and significantly reduces the arm burden on the pickers, but also removes long-brushed ploughs so that traditional mini-brushes can be installed at the bottom of the head, so as to collect fruit that is not easy to roll and break, such as strawberries and grapes。
Annex figure description
Figure 1 shows the face-to-face structure of a fruit-growing harvesting device proposed for this practical novelty
Figure 2 provides an overview of the partial structure in figure 1 of a fruit-growing harvesting device proposed for this practical novel。
Figure: hand handles, 2 connectors, 3 pick-up heads, 4 sides, 5 long boulders, 6 bags, 7 bags of links, 8 screwdrivers, 9 presses, 10 slots, 11 screws, 12 square locators, 13 screws。
Implementation modalities
The following is a clear and complete description of the technical options in this new practical implementation, taking into account the attached chart of the new practical implementation, which is clearly a partial rather than a complete one。
For reference figure 1-2, a fruit-growing pick-up device, including handle 1, pick-up head 3 and long bulge 5, with a fixed connection to the bottom of the pick-up head 3, with a permafrost 4 on the outer surface of the permafrost, with a permafrost of the permafrost 5 connected to the outside surface of the permafrost 6, with a fixed link to the edge of the top basket of bag 6, with a bag-to-axis 7 and the top-lock of bag-to-axis 7 tied to the end of the outside surface of handle 1。
In this implementation example, the outer surface of the pick-up head 3 has a screwdriver chute 11, the internal cord of the screw chute 11 has a screw 13, the top of the screw 13 has a screwdriver 8 and the screwdriver 8 activity is embedded in the outer surface of the pick-up head 3。
In this implementation example, the outer surface fixed to the bottom 13 of the screw has a short axle, the front end fixed to the short axle has a pressurized plate 9 and the outer surface to extract head 3 has set-aside slots 10 matching the short axle。
In this implementation example, the internal fixed connection of the spiral activity tank 11 has a square locator axis 12 and the inside of the screw 13 provides a square slot that matches the square locator axis 12。
In this implementation example, a fixed connection at the top of handle 1 has a connector 2 and a pick-up of the head 3 is attached at the end of connector 2。
Working principle: in the case of traditional fruit pickers, which will be fitted to the bottom of the top pick-up head with a fixed pick-up device, such as a pick-up gear, which will not be easily undismantled, and the handle of the pick-up will be long, the larger the weight of the pile of fruit accumulated in the pick-up head, the greater the grip at the end of the handle, according to the leverage method, the heavyr the arm burden of the picker will be required, in the case of this application, the bottom of long roll-out 5 will be connected to the bottom of the roll-out bag and the bag will be placed near the end of the handle 1 and the fruit will not easily roll directly within the length of the roll-out bag 6, the pile of the pick-up gear will be avoided at the end of the pick-up, and the length of the roll-off will be reduced to the length of the wheel by the length of the roll-on, and the length of the line will be carried to the length of the wheel of the roll-and-and-and-and-and-and-and-and-and-on。
In summary, the device not only directs oranges, apples and so forth to the bottom of handle 1, which is solid and heavy, at the time of extraction, and significantly reduces the arm burden on the pickers, but also removes the long-brush 5 so that the traditional mini-brush can be installed at the bottom of head 3 in order to collect fruits such as strawberries, grapes, etc., which are not easy to roll and break。
As mentioned above, the scope of protection is not limited to the more practical and practical ways in which it is implemented, but to the extent that any technical person familiar with the field of technology should be covered by the new practical technologies, which are replaced or modified on the basis of their practical and innovative design。
Technical characteristics:
1. A fruit-growing picker consisting of a handle (1), a pick-up head (3) and a long boulder (5), the characteristics of which are that the fixed connection to the bottom of the head (3) in question has a bump (4), the top wrap of the longbone (5) in the said boulder is on the outer surface (4), the bottom of the said boulder (5) is connected to a sack (6), the edge of the top basket in the said bag (6) is fixed to a bag-linked axis (7), and the top locks of the said boulder-linked axis (7) are secured on the outer surface of the handle (1)。
2. A fruit-growing picker described in accordance with claim 1 is characterized by a screwdriver (11) on the outer surface of the head-pick (3) in question, a screw (13) on the inside of the screwdriver (11) in question, a screwdriver (8) on the top of the screw (13) in question, and a screwdriver (8) on the outer surface (3) of the screwdriver in question。
3. A fruit-growing picker, as described in claim 2, is characterized by a fixed connection of a short axis to the base surface of the screw (13) in question, a pressure plate (9) to the front end of the short axis in question, and a reserved slot to match the short axis to the outer surface of the head (3) in question (10)。
4. A fruit-growing picker, as described in claim 2, is characterized by a square positioning axis (12) with a fixed internal connection to the screw activity slot (11) and a square slot (12) with a match to the square positioning axis (13) inside the screw (13)。
5. A fruit-growing picker described in claim 1 is characterized by a fixed connection at the top of the handle (1) in question with a connector (2) and the pick-up head (3) in question with a fixed link at the end of the connector (2)。
Technical summary
A new practical type of fruit-growing harvesting device has been made public, covering the technical area of fruit harvesting, with the traditional fruit pickers being equipped with fruit-receiving devices such as rags fixed at the bottom of the top of the pick-up head, which are not easily disassembled, with the handle of the pick-up device being long, the more heavy the fruit piled up at the head, and the greater the grip required at the end of the handle, which, under the principle of leverage, would seriously increase the arm burden on the picker, and the following options are proposed, including a handle, a pick-up head and a long brow. The device not only directs oranges, apples and so forth to the bottom of the handle, which is solid and heavy, at the time of extraction, and significantly reduces the arm burden on the picker, but also removes long-brushed ploughs so that the traditional mini-brushes can be installed at the bottom of the picker's head in order to collect fruits that are not easy to roll and fall, such as strawberries and grapes。
Technical developer: du qing
Protected technology users: professional cooperation in fruit and vegetable production from tianjin city social
Technology research and development day: 2020. 05. 07
Technical publication day: 2020. 12. 22
