Friends work at the electricity company and, several days ago, friends carried out a counter-piracy electrical screening of a high-tension rural area。
Following a check of the line in front of the watch, it quickly became clear that a family had taken a line of fire from the outside wall, which had entered the wall and disappeared. The family had used a low-pressure line to pass through the outside wall of his house, had set aside a dark line during the renovation, the end of the wire had reached the main switch box in the house, and had installed strangely two open doors, allowing for the opening of electricity at any time, the closing of the burglary at any time of the day when electricity was not available at home and when electricity was needed. It also diverts electricity from the home, where large-power appliances are connected to the line, such as air conditioning, cooking pots, etc., and light, which is less powerful, which is powered by the meter, which can be considered as a smart method in all the methods used to steal electricity。
However, such users who openly bypass the meter on a public low-pressure line are subject to numerous penalties. He was given a fine sufficient to use electricity for several years, and any violation of the regulations would be severely punished and would not be tolerated。
In a long-standing rural electricity survey, friends have identified a number of wire-tap users, who have found that the techniques used in rural areas are mainly the following:
First, most of the wire-wirers are wired in front of the watch, which usually places the lines in hidden places, such as the main power line passing through a user's house or near a house, the line's mess, the screens, the light is dark, and the above cases are buried in the wall, but the interface cannot be hidden, and detailed inspection is easily detectable. The purpose of this method is to divert a portion of the electricity from their own meters and then steal a portion of the electricity, thereby confusing the staff and avoiding inspection。
The second method of larceny is to work on the meter, which is mainly used by users based on trio-column, i. E., the release of voltage cables. The measurement of the deficit of the triple gauge voltage is affected. However, this does not affect collection, and if the three-channel users do not use the three-channel, the single-gauge can be used properly。
The third method is the hand-and-footing of a meter-wire pole, with wires, copper plates or a u-type connection, which shorts out and out of the fire. This can divert currents and reduce their use。
These three methods are the most common methods of rural electricity theft, but they are too small in technical terms, and can be done by people with a little common sense of electricity, but they are also the most likely to be detected, and if they are found, they will be severely punished, paid, severely punished and even punished。
It may be related to the general use of smart tables, which, in rural areas, have not seen a truly high-tech method of larceny, which is a complex, powerful and weak combination of electrons, and which, for rural users, want to work on the smart tables, with little basic knowledge of electronics and little knowledge of the principles of smart meters. And the real skilled electricians, if not individual moral losers, would not be too proud to use electrician technology to steal electricity, and those who steal electricity are almost half-aware about electricity, or those who think that they can steal electricity with 3 or 4 or 5 knives, but they tend to be cheap and cheap, as long as the staff are quick enough to grab one. The theft of electricity is therefore an offence and no attempt is made to steal it, which would have been detected and severely punished。
Have you checked any other wire-tap techniques in your work? Welcome to comment section
# electric technology exchange #
The electrician thing
# maintenance of electrician exchange #
Winter life plays katy
