[pretty] what is the rationale for fire suppression? Under the basic conditions of combustion, all fire-fighting measures are designed to destroy the already formed conditions of combustion, or to stop the chain reaction of burning, by extinguishing the fire and keeping the fire within a given range and minimizing fire losses. 3. Eliminate sources of fire. What are the basic fire protection measures? The basic fire protection measures are: 1 control of flammable materials. Fires of polar solvent b are not allowed to use chemical foam extinguishers or anti-soluble foam extinguishers. What's a fire? Uncontrolled in time and space and causing certain hazards of burning, referred to as fire. What are the reasons for the fire? The main causes of fire incidents are: arson, electrical, irregular operations, imprudent use of fire, play with fire, smoking, spontaneous combustion, thunderbolt and other factors such as earthquakes, wind disasters, etc. Second, the design capacity of the guidance lines is limited, and the unwieldy wires cause excessive loads of access and are prone to fires due to overload. 2. Once the fire has been confirmed, the fire control room or company duty officer shall immediately initiate the fire suppression contingency plan, forming a second fire-fighting force within three minutes, and commence work on the emergency response plan process. Production of five biogas station operators. Do you know what kind of fire-fighting equipment exists in the area of responsibility of your post and how to judge its effectiveness? Post enhancement training to inform every employee of what firefighting equipment is available in the area of responsibility and to maintain it. Do not take the elevator when there is a fire. Depending on the degree of risk in the area of fire, each department or company is authorized by the ministry of the environment, with strict compliance with the safety precautions set out in the instructions for hazardous operations. 2 what are the requirements for fire escape management? Response: fire spacing between fire escape routes and buildings must not be blocked or crowded; emergency exits from evacuation corridors must not be locked. 1 what are the main elements of routine fire inspections? Response: the main elements of the daily inspection are: first, whether the fire was broken or not; second, whether the fire extinguisher was missing or not; third, whether the fire spacing, evacuation routes and safe exits were blocked; fourth, whether there were obstacles in front of the fire extinguisher and fire extinguisher; and fifth, emergency lighting, safe passages, and missing exit signs. - what are the fire priorities and fire hazards? A: the main areas of our fire protection are biogas systems for environmentally friendly treatment, ammonia refrigeration systems for the production of one and three units, osteo-dry tower systems for the production of two units, high-voltage transformers, and packaging material warehouses. The common dry powder fire extinguishers are chemical inhibitors. Segregation act. Indoor use of co2 fire safety information question and answer devices, as soon as possible, leave the room for ventilation and avoid suffocation. What are the types of fires? Response: according to the latest national standards, fires are classified into categories a, b, c, d, e and f, which refer to: a for solid fires; b for liquid fires; c for gas fires; and d for metal fires. What is the subject of fire safety management under the new fire laws? The new fire act states that the subject of fire safety management is the social unit, which is required to: self-inspection, self-harm and self-responsibility. Open food processing zones should use electric heating facilities and should not be fueled with liquefied petroleum gas; unit operating lighting should be separated from power and fire-fighting power; no light or heating should be used in the premises; unit power switches, plugs, etc. Should be installed in closed tanks, which should be made from non-combustion materials; office parts should be separated from the doors to the office should be a level-class fireproof door, and accommodation of personnel should be prohibited from sharing with the premises in which they operate and stored. Iii. What are the requirements for the fire control room? The following systems, diagrams and procedures should be mounted on the wall in the fire control room: fire control room management and emergency response procedures, fire control room duty officer duties, fire control room daily management system, fire control room system alert planted position chart, duty and staff job qualifications; fire control rooms should have records of employee fire safety training, drills of fire emergency evacuation prepaid, list of fire facilities, fire control room duty logs, etc., and records and forms should be produced in a uniform manner; fire control room duty officers should have functional and operating protocols for fire control room equipment to ensure proper operation of fire control room equipment; uninterrupted duty duty records; prompt and effective disposal in case of fire; fire control rooms should not pile items not related to work and keep them clean; fire control room automatic fire alert system should be accessible to the city fire alert network control centre. (b) when there is a gap between the outer side of the counter and the ground, efforts must be made to block it, or to tighten it with a plank, to prevent customers from smoking and from throwing cigarettes and matches into the cracks; title i: what are the basic features of fire safety information and questions and answers at the mall? The mall is an integrated, large-scale store, in some cases called department stores or department stores, operating on a wide scale and with a wide variety of commodities. What are the fire protection requirements at the department store? The operator leaves the shop from work and should close the power supply in his or her area of responsibility and perform cleaning and inspection of his or her position. Which fire safety management systems should be established by the operation? The unit shall establish a fire prevention record, conduct fire-awareness education training, fire patrol and inspection, and organize at least one fire drill every six months; it shall form a compulsory fire brigade, not less than 30 per cent of the number of practitioners at the site; and it shall establish a fire safety conference system, chaired by the fire safety officer, who shall participate, not less than once a month, to study and solve fire safety problems and shall produce minutes or resolutions. Vi. What should be observed to ensure the safety of fire and electricity in units? Personnel performing fire-hazard operations, such as welding, gas welding and operators of automatic fire-fighting systems, are required to have a permit to take up duty and comply with fire-safety protocols; electrical line fittings, installation and maintenance of electrical equipment are to be operated by professionally qualified electricians and timely maintenance tests are to be carried out, and the electrical equipment is not to be randomly connected to wires or replaced by copper aluminum wires and increased without permission; at the end of business, the non-essential power supply of the premises should be cut off; fire works should be prohibited during business hours, and no fireworks or burning items should be used in the rooms to prevent external fire sources and children from playing with fire; production, storage and use of explosive chemical dangerous materials in the premises should be strictly prohibited; and the open fire areas in the unit's food processing area should be placed against the outer wall. When did the new fire act begin? Response: the new fire act came into effect on 1 may 2009. How do we handle electrical fires? Response: first, the switch is to be pulled off, the power is to be cut, and then the water is to be used to save; when the power is not to be cut, no water is to be used to save people from electrical damage, preferably with dry sand, with the conditional use of carbon dioxide and dry powder extinguishers。attention on fire extinguishers? Response: no liquids shall be sprayed in case of combustible liquid fires and no flammable liquids shall be sprayed on the body; no co2 extinguishers shall be used
