With its unique vision and appreciation, it is popular. If you're in love with this view, you might want to know more about its breeding points and the attention it takes to grow. In this way, you can easily access the material of the tree view and grow it effectively so that the beauty of the tree view can be sustained。
011. Pyramid basin breeding methods
1. 1 pyramid reproduction
Plugging is a common method of reproduction, usually in the spring. The operator can cut branches 5-15 cm long on a ready-to-be tree, each of which must contain 3-4 sprouts and retain 1-3 leaves. Thereafter, the treated branches are inserted into the pre-prepared flower basin, covering the plastic film to maintain temperature and humidity. In the absence of an accident, in about a month and a half, the branches can take root, and work can then be done。
1. 2 tile reproduction
If a plating method is used to obtain new material for the pyrotechnic basin, either conventional or high-stringed. In both ways, you can successfully get new tumble-basket materials。
▍ standard bar method
The branches are buried in the soil, and water is properly poured and separated from the original plant. A part of the branch is buried in the soil and crushed, using the conventional system of pressure, and water is subsequently watered to the appropriate extent. About a month later, new plants can grow. At this point, they can be separated from the original plant and planted separately。
You've got to be kidding me
Promote new roots through skinning, dressing and film treatment. High-strength barwork: select a strong branch and strip the bark with a width of approximately 1. 0-1. 5 cm at its proper location. Subsequently, wet peat, moss, etc. Were carefully wrapped around the wound to ensure that it was close and seamless. Subsequently, plastic sheeting was used to tighten the top and bottom sides of the film, and several small holes were placed on the film to facilitate air intake. Once the new root has grown, the branch can be cut off and planted。
1. 3 sowing reproduction
If you have seedlings on your hands, you can try to plant them. Seeds need to be sowed after water has been drawn and the temperature appropriate for germinate and urea-based solutions to grow. This will be done as follows: first, the drying of ripe twig fruit, then shredding and screening of small seeds. Seeds are immersed in water for approximately 12 hours, and once they are fully inhaled, they can be planted in pre-prepared flower basins, with due regard to the proper watering to promote seed growth。
The key to planting is temperature control. If the temperature is maintained at about 25-30°c, the seed will germinate within about half a month. Once the plant is growing steadily, fertilization can begin to be considered. At this point, 1 per cent of urea or potassium phosphate may be properly sprayed on the leaves of the aphrodisiac tree to promote further growth. Following these steps, the tree view will soon flourish。
1. 4 induced reproduction
Good stakes are chosen for the branches. This method can quickly produce a high-value pyramid view. First, a well-growing stake is selected, and then the branches of the ostrich tree are attached to it by ingratulation. After careful development, it will soon be possible to harvest a beautiful and highly utilitarian pelvis。
Element of conservation of the pyramid basin
2. 1 water-watering methods
The growing season requires one or two water sessions per day to maintain humidity to prevent water accumulation. During the growing season or when the weather heat is hot, an appropriate increase should be made in the number of times water is poured, usually one or two times a day, subject to ensuring that water is watered to avoid accumulation. In addition, if indoor air is dry, water can be sprayed on the leaves in order to maintain air moisture, thus ensuring the healthy growth of the pelican tree。
2. 2 fertilisation techniques
For the summer and autumn season, fattening of corrosive pies is applied every month, in conjunction with watering to ensure absorption. The demand for fertilizers is high in the long-term life of the tree, especially at the summer autumn festival. For both seasons, therefore, it is recommended to apply per month decomposed pie fattening water to the pelican tree, together with adequate watering to ensure that the fertilizer is effectively absorbed by the pelican tree. In the long term, fertilization can be reduced or omitted。
2. 3 cutting techniques
Early spring trims the branches that affect beauty to keep shape. Carefully trimming the tree: creating a beautiful view of the tree, which is essential. Usually, we recommend cutting in the early spring, mainly to remove the weak, the long and the sick. At the same time, if the new branches affect the overall beauty of the pyramid tree, they should be cut off together。
