As far as the trees are concerned, they are found in many parts of the south, while the provinces of guangdong and fujian are particularly numerous. The life force of the oak tree is very strong and the soil is not so demanding, but the alkaline soil will have some impact on its growth, and the oak tree is less drought-resistant, prefers damp and light-filled. In order to achieve faster growth of eucalyptus, part of the farm or compound fat can be added to the soil。
There are three steps in the method of embroidery
I. Basic family
1. The first choice is to cultivate soil, preferably by using the pond soil, and then by drying up the pond mud and mixing it with the river sand, which, if it is too big, must be broken into the back basin, so that the permeability and ingestion of the soil is optimal。
B. Cultivation: in general, the length of the bar is approximately 15 centimetres to cover the root of the cultured soil, and the length of the bar is about 6 to 10 centimetres into the cultured soil, which is then inserted with a slight pressure on the hand, which takes root and is placed in a cool light, so that the cultured soil is wet. The new sprouts are about 10 centimetres long, with more sunlight and adequate supplementation of nutrients. They can be filled with a small amount of compound fertilizer or urea solution, bearing in mind that the solution cannot be poured directly on bars and leaves and is 15-20 centimetres away from the root。
3 cuts: the first year is mainly based on the growth of the child, with only the buds that do not want to leave behind the branches, the second year is dominated by the long ones, which are tied together, the number of clippings is 1 to 2 times a year, after the first cut, and the length of the branches can be followed by a second cut. If you trim and tie it in your own way, three or four years later, you'll be in front of you。
There are two ways of farming in the field
1. Straight-on-the-ground insertion: the cutting of the branches of reproduction will be inserted directly into the land, with the first one or two days of drying up of the land without the plug, so that the land will be soft and at the same time the weed will be tanned, with the distance between 15 and 20 cm. It should be noted that the top of the piping is best sealed with a film。
2. Nutritional kits for cups:
First, prepare nutritional bags for the cup, if they do not have access to the electrician platform, and if there are no holes in the cups, they can be pierced in the lower half and at the bottom, so that the mixed mud and sand can be put into the cups, so that water can be poured. The ready branches are inserted in a nutrition cup or in a nutrition bag, and the earth around the branches is pressed gently with their fingers, so that they are fully integrated and lined up on the land。
3. If the weather is hot, proper shades and frequent water spills to the ground, depending on weather conditions, to keep the land wet and not to accumulate water, and if the water is overstretched, it is prone to root blackening and death. Some 3 to 7 days of infestation of the twigs gives rise to new mustaches, and when the twigs grow, the nutrients in the soil can be absorbed normally, and their survival rate is guaranteed. Inland infestation is generally sold as a green tree。
Iii. Pest control
Despite the small infestation of eucalyptus, poor ventilation or excessive nitrogen application of fertilizers, pollinosis can also occur and can be sprayed 500 times more with more than 50 per cent of the pixilable powder. Insects are generally likely to occur in mid-shells, where 80% of dichlorvos cream can be sprayed 1,500 times。
If friends have better farming methods, they can comment on them, so that more people can understand the techniques used to plant the tree。
