0. 11. Varieties and conservation of pyramid plants
There is a wide variety of pyramids, including red, yellow, white, etc., representative of swabs, pine, etc., as well as styrofoams of various forms, up to a hundred or more. Of these, ginseng and thai ginseng are common types. There are a wide variety of pyramids, covering three main categories: red, yellow and white. By further subdivision, the common species of oscillosis include guacamole, pineapple, broad leaves, etc., as well as styrofoams of various forms, totalling more than 100 species。
The core of conservation techniques lies in the appropriate growth environment, and although there are subtle variations in conservation techniques for different types of pyro-basin, overall warmness, adequate light and moderate moisture are required. Conservation techniques are critical to the proper growth environment, ensuring that the soil is wet but without water, providing adequate light and maintaining appropriate temperatures。
622. Cultivation and conservation
2. 1 methods of cultivation
Pyramid trees can be breeded by admixtures and strains. Plugging requires the selection of a strong branch, the insertion of an air-transmitting mixture for cool conservation, and the transfer of well-growing and unusual-forming pillars from the mother's farm. Select a strong branch to cut and then insert into the soil accelerated and acidic mix of rock powder, river sand, and coal sludge at a depth of about 3 cm. The water was then fully watered and the plant was moved to the cold backwind for conservation. In day-to-day management, soil should be kept wet but without water. Since pelican trees are usually sprouted and then root, when they grow up to 5-6 cm, the stakes can gradually receive sunlight, and when they are sprouts and roots, they can be transplanted。
2. 2 soil selection and light
The soil needs to be ventilated and acidic, there is sufficient demand for light, and long-term darkness leads to leaves falling. Soils with high lime content are not conducive to the growth of pyrotechnic trees and need to be protected against over-pressure to ensure air penetration. In selecting the pelvis, consideration should be given to its permeability, drainage and fertility. For the reproduction of osteoporosis trees, a combination of lax and acidic stone powder, river sand, and cinder is recommended。
2. 3 temperature management
Pyramid trees are suitable for warmer environments and need to be moved to the interior during cold tides and at temperatures not less than 5°c. Excessive temperatures can lead to leaves falling, and the temperature differential in the growing environment needs to be strictly controlled. Temperature is an important factor influencing the growth of oscillates。
2. 4 water-water management
Water must be watered in accordance with the “dry and wet” principle, increased water during the growing season and a moderate dryness during the winter season, especially when growing in shallow basins, to avoid root decay. Since the swarms tend to grow in shallow basins, we need to follow the “dry-wetting” principle to prevent root decay caused by overwatering。
2. 5 fertilizer techniques
Long-term fertilization is required on a monthly basis, dominated by nitrogen, phosphorus and potassium fertilizer, and reduced or even stopped fertilization in winter, maintaining soil nutrient balance. During the summer and autumn periods, two oscillating trees are recommended for at least one fertilisation per month because they require large nutrients。
2. 6 cutting and changing basins
Regularly trim the control form and promote healthy growth, with a change of basins choosing the right timing and packaging, and a cut of roots for growth. Every two years, we should carry out a full-scale earth-changing exercise on the sap. In the process of changing basins, shredded and decomposed organic fats are incorporated into the basin at appropriate rates, so that the necessary nutrients can continue to be provided to the pelican trees。
2. 7 pest management
Maintaining good environmental ventilation and introducing appropriate pesticide control measures can effectively prevent and control pests such as vermin disease. Pyramid basins are vulnerable to shellworm disease if they are kept in a hot and unventilated environment for long periods of time。
Causes and responses to the leaf problem
3. 1 leafs yellow
The yellowing of leaves, often due to inadequate light, water and nutrients, requires ensuring sufficient sunlight, rational management of moisture and fertilization. The tree prefers sufficient sunlight, so it must be raised in a good light environment。
3. 2 leafs falling
Discharges are often caused by poor light, moisture and temperature, and need to be placed in an environment with sufficient light and moderate temperature, where water is appropriate in a timely manner. The temperature differential in the environment in which the oscillation is grown needs to be kept within a reasonable range, and a temperature difference of more than 10 degrees may lead to the loss of leaves or even death of the oscillation tree. Special attention is to be paid to temperature changes in the cultivation of the platinum trees in the north。
